Alteon 10000 Specifications |
Available Throughput Licenses
| Up to 4 ATCA-compliant, payload blades - delivering 20Gbps, 40Gbps, 60Gbps and 80Gbps scalable throughput capacity
|
|
|
Non-blocking Switch Fabric
| 480 Gbps
|
|
|
Layer 2 Switching
| Wire-speed
|
|
|
Simultaneous Sessions
| Up to 44M
|
|
|
Routing Protocols
| OSPF, RIP, BGP
|
|
|
Gigabit/Fiber Ports
| - 15 X 10 Gigabit or 1 Gigabit Fiber Ports (depending on SFP/SFP+ pluggable optics)
- 8 X Gigabit Ethernet Ports (Copper)
|
|
|
Pluggable Optics Operating Distance
| Fiber ports deliver the following interfaces depending on pluggable optics:- Short reach SFP, 1000BASE-SX 850nm, multi-mode; distance .2-275m with 62.5/125μm MMF; distance .5-550m with 50/125μm MMF
- Long reach SFP, 1000BASE-LX 1310nm single-mode; distance up to 10km with 9/125μm SMF
- Short reach SFP+, 10GBASE-SR 850nm multi-mode; distance up to 300m with 50/125μm MMF
- Long reach SFP+, 10GBASE-LR 1310nm single-mode; distance up to 10km with 9/125μm SMF
|
|
|
Serial Management Console
| RS-232C port
|
|
|
Shelf Manager (ShMC)
| - Front, redundant, hot-swappable IPMI v1.5 Shelf Manager
- Nine, high-brightness LEDs indicating Critical, Major, Minor alarms, Power Good, shelf Active, H/S and ShMM status indicator
- Telco Alarm – Alarm relays capable of carrying 60VDC, or 1.0A, with a maximum rating of 30VDC
- Full IPMB support, IPM controller sensor entries – fan speeds monitors, local temperatures, predicted failure alerts, input voltage
- Shelf temperature sensors (inlet, outlet)
|
|
|
Dimensions
| - Height: 6U / 266.7 mm (10.5 in)
- Width: 448 mm (17.637 in)
- Depth: 385.8 mm (15.1 in)
- EIA Rack or Standalone: 482 mm (19 in)
- EMI gaskets and hardware spacing to support FCC part B
|
|
|
Weight
| 32.85 kg (74.42 lbs)
|
|
|
Environmental
| - Operating temperature: -5 to 55 °C (23 to 131 °F)
- Humidity: 5% to 85% non-condensing
|
|
|
Power
| - AC power supply
- Auto-range: 100-240 V, 47-63 Hz
- Power consumption (typical / maximal): 774 W / 1542 W
- Heat dissipation (typical / maximal): 2639 BTU/h / 5258 BTU/h
- DC power supply
- Auto-range: -48~-60 V
- Power consumption (typical / maximal): 643 W / 1283 W
- Heat dissipation (typical / maximal): 2192 BTU/h / 5375 BTU/h
- Up to three load sharing, self cooled, hot-swappable integral power supplies
- Redundant PEM modules, redundant EMC filtered power feeds
|
|
|
Cooling
| - Two front, hot pluggable fan trays each with 10 axial, high-performance fans
- Push-pull, N+1 i.e. any fan can fail with no service degradation
- Front, washable, field-replaceable, NEBS GR63 air filter
- Variable speed under Shelf Manager control
|
|
|
Certifications
| - Safety: UL, CE compliant
- EMC: CE & FCC part 15 subpart B, VCCI class A
- NEBS level-3 ready
- RoHS 6 compliant
|
|
|
